Standard Module
The Absorbance Photometer Module is a open standaed Photometer-module-concept for integration into OEM applications, e.g. Cuvette Readers.
It can be adapted to fit Cuvettes of any size. The Module is controlled via TTL. RS 232 serial or USB interface, with a minimum of commands. It is also possible to adapt the communication on hard- and software for any host processor.
Measurement procedures can easily be programmed through scripts.
For service or testing, simply use any terminal program available.
| Reading Type: | Direct reading or Flow Cell |
|---|---|
| Measurement Cell: | Black anodized aluminum |
| Cuvette Sizes: | Measuring cell be adapted to any cuvette size |
| Light Source: | LED |
| Detector: | Selective photoreceiver for elimination of ambient light |
| Lifespan of Light Source |
LED: = 20.000 - 100.000 hr / depends on wavelength |
| Interface | RS232 or USB for full external control of the module
The Module reads the transmission loss and computes the optical density |
| Wavelength Range: | 340 - 900nm |
| Absorbance Range: | 0,0 - 3,5 OD (400-900nm) and 0 - 3,0 OD (340-399nm) |
| Resolution: | 0,00001 OD (0,1 mOD) |
| Precision: | ≤ ± 1% (for 1 to 3,5 OD) und ± 0,005 OD (for 0 to 0,5 OD) |
| Channels: | 1,2 or 4 channels |
| Power Requirements: |
LED photometers: 10V unstabilised DC / 1-2 W (depending on number of channels) |
| Electronics: | SMD elements
DA - converter with 19 bit effective resolution Asynchron port up to 115 kBaud USB |
| Temperature Control: | optional, stable after warming-up-time |